Flow Meters manufactured in Britain
Search
Close this search box.
+44 (0) 1722 410 777

Metri IC-DTS Flow Meter Display

Metri Measurements made in britain

The Metri DTS (Display Transmitter Switch) is an industrial flow meter display designed for use with Turbine and Paddlewheel flow sensors that have a magnetic mV output.

The DTS display offers users a simple easy to read control interface providing Analogue 4-20mA (Flowrate) with a High or Low relay alarm output. The alarm can be reset once a problem has been identified and resolved. The DTS accuracy can be further enhanced with an optional (Factory set) 10 point linearisation with the frequencies entered at each point. The unit will interpolate between these points to enhance the flow meter accuracy within the flow range and enhance repeatability.

The display itself is a 36mm x 28mm backlit LCD screen, making it easily visible in dimly lit areas. It has 2 x 10 characters of text providing quick access to flowrate, totalisation and alarm status information.

Flexibility is further enhanced with the option of a compact (sensor mounted) or remote display away from the flow meter when the meter location is in poor access areas or in higher temperature applications.

When the alarm is triggered the display flashes until the alarm setpoint hysteresis has been reached.

Metri IC-DTS Flow Meter Display Features:

  • Compact or remote installation
  • Visual alarm
  • Local flow rate and totaliser indication
  • Resettable totaliser
  • Compatible with IC-LPM Paddlewheel or IC-LTM Turbine flow sensors
  • The DTS can be fitted to a wide range of other flow meters, please contact us for further information.

Metri IC-DTS Flow Meter Display – Specification:

The Metri IC-DTS Flow Meter Display is a Flow rate and Totaliser with 4-20mA and Relay output Alarm switchpoint that can be set as high or low anywhere in the flow range.

Operating temperatureLocal mount temps: -40 to 65ºC (Standard)
Remote mount medium and high temps: -40 to 350ºC
MaterialsBody: 304 stainless steel (standard); 316 (optional); other materials available on request
Glass
Electrical connectionM12 x 8 pin
Electrical specificationNominal supply voltage: 24VDC, (Galvanic Isolation from the supply is critically important)
Load current: 60mA
Frequency range: 30Hz – 3Khz
Relay contact ratingRelay – SPST-NO: Voltage free contacts
Maximum voltage switching: 24 VDC
Maximum current switching: Milliamps – 500mA
Note: A fuse is recommended that is rated suitably for the rating of the load.
DimensionsH 69mm W 69mm W(inc cable plugs) 190mm D 86mm Weight 1.2kg
Approvals/RatingCE/IP65, EN61326-1:2013 CAT 1, EN550011:2016 A1:2017

Local or Remote Flowrate Totaliser

4-20mA Analogue Output

10 Point (Factory Set) Linearisation

Low / High Alarm Output

Backlit LCD Display

Fast & Easy Configuration

Looking for one of our products

If you would like more information or are interested in purchasing our products, please complete the form with your details and inquiry. For interest in multiple products, include those details in the message box. We will follow up on your submission shortly.

We look forward to hearing from you.