Flow Meters manufactured in Britain
Search
Close this search box.
+44 (0) 1722 410 777

IC-UPL Ultra Pro-Lite Portable Ultrasonic Flowmeter

Metri Measurements made in britain

The ProLite+ comes in a small package that is easily pocketable and importantly, affordable, but with great performance. The system uses advanced digital signal processing, as all the best flow meters of this type do. The flow meter has great signal diagnostics, and we supply the flow meter with everything required to get fast and accurate flow rate measurements within a few minutes. Three sensor sizes cover the range from 12mm to over 2 metres. There is also a configurable 4 M Byte internal datalogger for flow surveys. As well as the meter and sensors we provide a transducer rail, 2 rechargeable Lithium-ion batteries, ultrasonic couplet gel, data and charge cables, temporary sprung loaded chain fixings and a 5 m tape, in a carry case. We want to support you as a customer to get a great ultrasonic flow meter experience and will do everything we can to support you and give you the correct advice. iCenta have considerable application and design experience having been selling and supporting ultrasonic flowmeters for decades now.

IC-UPL Ultra Pro-Lite Ultrasonic Flowmeter Features

  • Suitable for use with DN10 to DN2000+ pipe diameters.
  • Temperatures: unit up to 65 °C, transducers -30 to 80°C.
  • 100:1 turn down ratio.
  • Lightweight: 230g including internal battery.
  • Backlit graphic display.
  • 12 hours continuous use on single 9V PP3 battery.
  • Full set of instrument and measurement diagnostics.
  • Data acquisition for historical data and analysis.
  • Signal oscilloscope for sensor positioning and diagnostics.
  • Internal database of pipe, fluid and lining materials.
  • Wall thickness gauging as standard (using wall thickness probe).
  • Heat quantity measurement (if inlet and outlet temperatures are known).
  • All measured values can be totalised.
  • Ability to save up to 12 configurations for different measurement points.
  • Integral pipe wall thickness gauge 2 to 24mm, using optional wall thickness gauge probe.

          Can be supplied with a calibration certificate, if required.

This powerful clamp-on fixed installation instrument has been designed for ease of use and installation on a broad range of pipe material and in areas where space is limited or installation of in-line flow meters is impractical. Intuitive menu and accurate readings make this instrument an essential addition to process environment. This flow meter uses UK developed Digital Signal Processing technology for accurate flow rates at a very competitive price point.

 

Features and Benefits

  • Six IO Modules are available.
  • Product identification functionality. Can be used for oil dewatering
  • Mains AC or DC options available (85-240 V ac or 12-24V dc at 10W)
  • Transducers – Small Medium and Large transducer options available. 10 to 3000 mm pipe diameters
  • Intuitive menu-driven interface
  • Well-organized display, and keypad layout
  • Seamless functionality with heat quantity measurement capabilities
  • Equipped to accommodate up to six optional plug-in IO modules, enhancing its versatility

 

Specifications

Pipe Size

10 to 3000 + mm

Compatibility

Any clean fluid (full-pipe).  Gas/solids <10% of Volume.

Weight

230g  (Including PP3 Battery)

Flow Range

0.01 to 25m/s

Resolution

0.25mm/s.

Measurement Rate

1 Hz as standard (see options below)

Repeatability

0.15% of measured value

Accuracy

+/- 1-3% of measured value depending on application,     

+/- 0.5% of measured value with process calibration against reference meter.

Turn down ratio

100:1

Dimensions

185 x 85 x 25mm

Approvals

IP54 enclosure

Display

128 x 68 pixel graphics display with backlight

Keypad

17 keys with audio feedback

Battery Life

Up to 12 hrs continuous use

Transducer Material

Stainless steel and PEEK

Transducer Temperature Range

-30 to +80°C

Transducer Rating

IP68

Transducer Cable Length

1.5m

Transducer Dimensions

60 x 30 x 35mm (Standard)  

40 x 20 x 25 (locations with limited access)

Wall Thickness Gauging

2 to 24 mm (using optional wall thickness gauge probe)

Download

Instrument Options Available

Product Reference

Application

Option

   

IC-UPL-02-D500

Pipe diameters of 500 mm or greater

With Data Logger, 1MHz

IC-UPL-02-D025

Pipe diameters of 25 to 500 mm

With Data Logger, 2MHz

IC-UPL-02-D010

Pipe diameters of 10 to 25 mm

With Data Logger, 4 Mhz

IC-PWT-GP

Wall Thickness Gauge Probe

 

Supplied with: Main Unit, Sensors, Cables, Coupling Gel, Tape Measure, Clamping Rail,  USB External Battery, Micro USB Connector, 3 x PP3 Batteries, Plus handy carry case.

Looking for one of our products

If you would like more information or are interested in purchasing our products, please complete the form with your details and inquiry. For interest in multiple products, include those details in the message box. We will follow up on your submission shortly.

We look forward to hearing from you.